Table of Contents
Advertisement
Chapter 2
This chapter describes all of the basic configuration tasks which includes the System
Information and any management of the Switch (e.g. Time, Account, IP, Syslog and
SNMP.)
2-1 System Information
After you login, the switch shows you the system information. This page is default and tells
you the basic information of the system, including "Model Name", "System Description",
"Contact", "Device Name", "System Up Time", "BIOS Version", "Firmware Version",
"Hardware-Mechanical Version", "Serial Number", "Host IP Address", "Host Mac Address",
"Device Port", "RAM Size" , "Flash Size" and. With this information, you will know the software
version used, MAC address, serial number, how many ports good and so on. This is helpful
while malfunctioning.
2-1.1 Information
The switch system information is provided here.
Web interface
To configure System Information in the web interface:
1. Click SYSTEM, System, and Information.
2. Specify the contact information for the system administrator as well as the name and
location of the switch. Also indicate the local time zone by configuring the appropriate
offset.
3. Click Refresh
Figure 2-1.1: System Information
System Configuration
XGS3600 Series User's Guide
4
Advertisement
Table of Contents
