Zooming Segments In Sequence Mode - Teledyne LabMaster 10 Zi Series Operator's Manual

Zooming Segments in Sequence Mode

You can zoom individual segments easily using the Zoom front panel
button. When you zoom, the zoom traces default to Segment 1. Channel
descriptors indicate the total number of segments acquired. Zoom
descriptors indicate [Seg #] and #Segments in the Zoom. You can scroll
through the segments usingZoom front panel position knob.
1.
Touch the front panel Zoom button.
2.
Turn the
segments.
3.
To vary the degree of zoom, touch the newly created Zx trace
label. The setup dialog for the zoom (Z1 to Z4) opens. It shows
the current horizontal and vertical zoom factors.
LM10Zi-GSM-E Rev A
Sample Zoom of Segments in Sequence Mode
Z
front panel position knob to scroll through the
OOM
Getting Started Guide
81