Dialog Area - Teledyne LabMaster 10 Zi Series Operator's Manual


Add another label by touching the Add label button. Delete a
label by selecting the label from the list, and then touching the
Remove label button.

Make labels visible by touching the View labels checkbox.

Dialog Area

The lower portion of your oscilloscope screen is where information is
shown, selections are made, and data is input. These screens are
organized into tabular displays, subtabs, or pop-up dialogs. The dialog
area is controlled by Touch Screen Controls and Front Panel Controls.
P -U S
OP P ELECTOR
When Pop-Up selector controls are touched, sometimes a very small
box is shown right inside the control - as in the following control for
Coupling on the C1 dialog.
Other times, a larger box is shown after touching a control. This larger
Pop-Up has categorical buttons along the left column along with labels
(and sometimes descriptions) for the selectable entry values.
LM10Zi-GSM-E Rev A
C
ONTROLS
Pop-Up Selector Control for smaller values.
Getting Started Guide
61