Back Of Mcm-Zi Master Control Module - Teledyne LabMaster 10 Zi Series Operator's Manual

Back of MCM-Zi Master Control Module

1. ChannelSync Outputs -
SMA 10 GHz Clock and
PCIe 1 Lane Control
Connections (for
corresponding
Acquisition Modules)
2. 10 MHz Reference
Clock Output
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item number 1 on the
back of your Master Control Module) using the provided chain-
linked 50 Ω terminations (not shown).

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master
Control Module and Acquisition Modules.

DVI-D Video Output is for use with an additional external
monitor for Extended Desktop mode.
LM10Zi-GSM-E Rev A
Number and Description
3. 10 MHz Reference
Clock Input
(Grounded EMI
Shield required when
port is not in use)
4. Removable Storage
Drive
5. AC Power Inlet
Getting Started Guide
6. The I/O Panel
7. DVI-D Video
Output
8. PCIe 4 Lane Data
Inputs (from
corresponding
Acquisition
Modules.
13