Comparing A Single Parameter - Teledyne LabMaster 10 Zi Series Operator's Manual

LabMaster 10 Zi Oscilloscopes
Select the desired condition.
NOTE: Right-hand dialogs on the Qx dialog vary based on the Pass/Fail
condition selected.
C -B
ONDITION
Boolean Identity
This condition simply passes through the input values as the desired
result.
Param and Dual Param Compare
Using the Param Compare conditions, each Pass/Fail input (Qx) can
compare a different parameter measurement to a user-defined limit (or
statistical range) under a different condition.

Comparing a Single Parameter

1.
With the ParamCompare condition selected on a Qx dialog, touch
inside the Compare Values field and select All or Any from the
pop-up menu.
152
R
ASED IGHT
-H D
AND IALOGS
LM10Zi-GSM-E Rev A