Table of Contents
Advertisement
LabMaster 10 Zi Oscilloscopes
Now, connect the other end of the 1 Lane cable into the SYNC socket on
the back of the Acquisition Module.
Repeat the previous steps for every additional Acquisition Module in
your system.
PLEASE NOTE THE FOLLOWING:
PCIe 1 Lane Cable plugs are keyed with a single groove along one
wide side of the plug. The plug must be inserted into the socket
with the groove aligned properly.
Connect into your Acquisition Modules from the correct channel
groupings on the Master Control Module; meaning, your first
22
LM10Zi-GSM-E Rev A
Advertisement
Table of Contents
