Table of Contents
Advertisement
LabMaster 10 Zi Oscilloscopes
External Display Setup
Setting up the Zi-EXTDISP-15External Display involves making DVI-D and
USB connections and some touch screen selections. The USB connection
is a "hot swap," so there's no need to restart the instrument once
you've connected.
1.
With your system powered down, attach the Zi-EXTDISP-15
power cord from the power port of the PCIe card on the back of
the Zi-EXTDISP-15 monitor to an AC socket.
2.
Attach the provided DVI-D cable from the back of the Master
Control Module to the DVI-D port on the Zi-EXTDISP-15 monitor.
3.
Attach the provided USB cable (where applicable) from the back
of the Master Control Module to a USB port on the Zi-EXTDISP-15
monitor.
4.
Turn on the oscilloscope.
5.
When the instrument has finished booting, touch Display →
Display Setup... from the menu bar.
6.
In the Second Monitor Configuration section of the Display
dialog, touch Open Monitor Control Panel.
7. Use the
your external monitor settings.
32
Intel® Graphics Media Accelerator Driver
to adjust
LM10Zi-GSM-E Rev A
Advertisement
Table of Contents
