Sma 72" Cables - Channelsync Clock - Teledyne LabMaster 10 Zi Series Operator's Manual


If you are connecting less than 5 of the Slave Acquisition
Modules, the PCIe 4 Lane Data Inputs on the back of the Master
Control Modulemay not be skipped and must be connected in
consecutive order from the PCIe 4 Lane Data Outputs on the
back of the corresponding slaves.

Pull gently on the green pull tab on the cable plug for removal.

SMA 72" Cables - ChannelSync Clock

Connect each SMA 10 GHz Clock Output on the back of your MCM-Zi
Master Control Module to the SMA 10 GHz Clock Input on each 10-xxZi
Acquisition Module used in your system using the SMA 72" cable(s)
provided.
Note: Use an SMA torque wrench and ensure connections are properly
tightened.
LM10Zi-GSM-E Rev A
Getting Started Guide
27