Teledyne LabMaster 10 Zi Series Operator's Manual page 208

Getting Started Guide
Color
Use this dialog to customize the colors used for Channels, Math, and
Memory traces when shown on your instrument and when used in print
output.
NOTE: These color settings match a waveform on the grid display (both
on-screen and printed) and show consistently on corresponding dialogs,
tables, and trace descriptor labels.
Channels - Make Screen and Print color selections for C1 through C4 by
touching one of the color swatches. When the Color pop-up is
displayed, use it to specify your desired color.
Math Traces - Make Screen and Print color selection for F1 through F8
by touching one of the color swatches. When the Color pop-up is
displayed, use it to specify your desired color.
Memory Traces - Make Screen and Print color selection for M1 through
M4 by touching one of the color swatches. When the Color pop-up is
displayed, use it to specify your desired color.
Factory default colors - click this button to instantly recall the original
color settings for your instrument.
NOTE: Print colors are used only when the Colors control is set to Print
on the Hardcopy dialog in Utilities → Utilities Setup.... For convenience,
the Preview print colors button is provided on this portion of the dialog.
When the button is touched, a preview is generated on the grid display
area. A subsequent touch of the button closes the preview.
LM10Zi-GSM-E Rev A 201