Teledyne LabMaster 10 Zi Series Operator's Manual page 185

LabMaster 10 Zi Oscilloscopes
PLEASE NOTE THE FOLLOWING:

Select Audio to save your waveforms into the .wav format.

The WaveML format, which enables XML output, is used for
persistence traces.
Vector Signal Analysis (VSA) Support
Users with the VSA Support Software option can choose With Header
from the SubFormat control.
This stores the waveform in VSA recall format for later use.
Note: An Analysis function also comes with the VSA Software which can
send signal traces to VSA as a recording (time domain) file.
You can use the Auto Save feature to automatically save a waveform to
disk after each new trigger.
1. On the Save Waveform dialog, touch one of the Auto Save
buttons.
2. Select Wrap (old files overwritten) or Fill (no files overwritten).
CAUTION Selecting Fill can quickly use up all the hard disk
space on your instrument.
3. Touch the Browse button next to the Save file in directory
control and navigate to the location where you want the file
178 LM10Zi-GSM-E Rev A