Table of Contents
Advertisement
4.
If you do not see a resulting histogram (i.e., you see a track or
trend), touch Graph with: and choose Histogram from the pop-up
menu.
5.
Touch the Histogram tab at the right to display the Histogram
right-hand dialog.
6.
Touch #Values and enter the number of parameter values that
will be contained in the histogram.
7.
Touch #Bins and enter the number of bins that comprise the
histogram. This determines how many bars appear in the
histogram.
8.
To let the oscilloscope position the histogram, check Enable Auto
Find, then touch the Find Center and Width button.
OR
TouchCenter and Width and enter values.
Viewing Thumbnail Histograms (Histicons)
Histicons are miniature histograms of measurement parameters that
appear on the measurement table. These thumbnail histograms let you
see at a glance the statistical distribution of each parameter.
1.
Choose Measure > Measure Setup from the menu bar to access
the Measure dialog.
2.
Select Show Table and choose to show My Measure (custom
parameters), Std Vertical measurements, or Std Horizontal
measurements.
3.
Turn On the parameters you wish to display.
LM10Zi-GSM-E Rev A
Getting Started Guide
145
Advertisement
Table of Contents
