System Recovery - Teledyne LabMaster 10 Zi Series Operator's Manual

System Recovery

Your oscilloscope is designed to operate reliably for many years. The
application software runs on the Windows platform. Loading or
removing additional Windows applications can cause problems in the
stability of the operating system. Severe cases may require a reloading
of the base operating system and oscilloscope application. Teledyne
LeCroy provides you with the Acronis recovery application and a backup
image in a partition (drive D: ) of the instrument's hard drive.
Instructions for running the recovery application are stored on the
oscilloscope desktop. You can also download Oscilloscope System
Recovery Tools and Procedures, which contains instructions for using the
Acronis® True Image® Home application.
Since third-party recovery software is used, our instructions may not be
the most definitive or current. We encourage you to take advantage of
resources available on the Acronis website at www.acronis.com.
After the recovery procedure is done, re-activate Windows either by
Internet connection to Microsoft's Web site or by telephone. Have your
Windows Product Key number (shown on a sticker on your oscilloscope)
handy during Widows reactivation.
PLEASE NOTE THE FOLLOWING:

The recovery process produces a replica of the operating system
and oscilloscope application software at the revision levels when
the oscilloscope was manufactured. Any further revisions of the
application software, Windows operating system, or virus scan
definition files are not automatically upgraded. Therefore, we
recommend that you upgrade the individual components to
current revision levels after completing the disk image recovery.

The current oscilloscope application software can be downloaded
directly from www.teledynelecroy.com. Since the calibration data
for the oscilloscope is stored in the D: drive, current calibration
constants are not overwritten during the recovery process.
LM10Zi-GSM-E Rev A
Getting Started Guide
203