Setting The Progress Reporting Mode For The Sequences; Table 4-10: Sequence Progress Reporting Mode - Teledyne T700 Operation Manual

Overview of Operating Modes and Basic Operation

4.3.1.7. Setting the PROGRESS Reporting Mode for the Sequences

Table 4-10: Sequence Progress Reporting Mode

MODE
STEP
PCT
ELAP
REM
130
As sequences run, the T700 calibrator reports progress by displaying a message in the
MODE field of the front panel display (See Figure 3-1). There are several types of
report modes available (see Table 4-10).
Shows the progress as the sequence name and step number. This is the traditional display.
Example: Progress for a sequence named "SO2_Test" would appear as "SO2_Test-2",
indicating that it is currently executing step 2.
Shows the progress as a percent (0–100%) of each duration step.
Example: "SEQ 48%"
Shows the progress as time elapsed in hours, minutes and seconds, counting upward from 0.
Example: "T+01:30:25" (i.e. 1 hour, 30 minutes, 25 seconds have elapsed)
Shows the progress as time remaining in hours, minutes, and seconds remaining, counting
downward to 0.
Example: "T-01:30:25" (i.e. 1 hour, 30 minutes, 25 seconds are remaining)
To select a PROGRESS report mode, press:
Teledyne API – Model T700 Dynamic Dilution Calibrator
DESCRIPTION
06873B DCN6388