Teledyne LabMaster 10 Zi Series Operator's Manual page 123

LabMaster 10 Zi Oscilloscopes
5.
Touch the Axis labels checkbox to permanently display the values
of the top and bottom grid lines (calculated from volts/div) and
the extreme left and right grid lines (calculated from the
timebase).
6.
Choose a line style for your trace: solid Line or Points as follows:
7.
Touch inside the trace Intensity data entry control if you want to
change the value. Enter a value from 0 to 100.
NOTE: Touch the Monitor tab for external monitor display
settings.
116 LM10Zi-GSM-E Rev A