Save/Recall; Save/Recall Overview; Saving And Recalling Setups - Teledyne LabMaster 10 Zi Series Operator's Manual

Save/Recall

Save/Recall Overview

The Save/Recall section allows for storage and retrieval of Waveforms,
Table Data, and Instrument Setups. It even provides Disk Utilities for
arranging the file/folder structure on your instrument's hard drive.
Access each Save/Recall function (Waveform, Table, Setups) from the
File menu on the menu bar.
A main Save/Recall dialog is shown providing buttons to access the
aforementioned dialogs for specific Save/Recall functions.

Saving and Recalling Setups

The Save/Recall Setup dialogs allow for quick saving and recalling of up
to six oscilloscope panel settings internally on your instrument. If
desired, you can also save and recall your oscilloscope panel settings as
an .lss file to a specific hard disk location, a network location, or USB
drive.
Saving Oscilloscope Setup(s)
Access the Save Setup... dialog by either selecting File → Save Setup...
from the menu bar or clicking the Save Instrument Setup button on the
main Save/Recall dialog. Now use one of the following two methods to
save setup(s).
S S
AVE ETUP
1.
Touch inside one of the six SetupX data entry controls in the Save
to Internal Setup... section and providing a name.
2.
Touch its corresponding Save button directly to the left.
LM10Zi-GSM-E Rev A
( ) I
S NTERNALLY ON
Getting Started Guide
Y I
OUR NSTRUMENT
173