Sampling Modes; Sampling Modes Overview; Selecting A Sampling Mode - Teledyne LabMaster 10 Zi Series Operator's Manual

LabMaster 10 Zi Oscilloscopes

Sampling Modes

Sampling Modes Overview

Depending on your timebase, you can choose:
Single-shot Sampling Mode (on page 75) - Also known as Real Time
mode, a series of digitized voltage values sampled on the input signal at
a uniform rate.
Sequence Sampling Mode (on page 76) - Many trigger events stored as
segments into the oscilloscope's memory.
RIS Sampling Mode (on page 84) - Random Interleaved Sampling (RIS),
an acquisition technique that allows effective sampling rates higher
than the maximum single-shot sampling rate.

Selecting a Sampling Mode

1.
Touch Timebase → Horizontal Setup... from the menu bar.
2.
On the Timebase dialog, select a Sample Mode.
3.
If you chose Sequence Mode, touch the Sequence tab and
provide values for Number of Segments, Enable Timeout,
Timeout (value), Display Mode, and Show Sequence Trigger
Times.
74 LM10Zi-GSM-E Rev A