Teledyne LabMaster 10 Zi Series Operator's Manual page 194

7.
Touch the Hardcopy Area control to choose which part of the
screen you want to print from the pop-up menu.

Choose Grid Area Only if you do not need to print the
dialog area and you only want to show the waveforms and
grids.

Choose DSO window if you want to print the dialogs with
the waveforms and grids. Choose Full Screen if you want
to print the entire screen.
NOTE: The Date is included on the lower-right of Printer, Clipboard,
File, or Email output.
Q P
UICK RINTING
Similar to printing a screen image, choose from either of the following
methods to quickly print from your instrument:

Press the Print front panel button. Then, touch the Print Now
button from the Print flyout menu.

Touch Utilities → Utilities Setup... and click the Hardcopy tab. On
the Hardcopy dialog, touch the
P
RINTING A
You can print in one of three ways:

Press the Print front panel button. Then, touch the Print Now
button on the Print flyout menu.

Choose File → Print from the menu bar.

Choose Utilities → Utilities Setup... and click the Hardcopy tab.
On the Hardcopy dialog, touch the
NOTE: The instrument uses the Print settings on the Hardcopy dialog to
print the screen image. Using the Hardcopy dialog has some additional
LM10Zi-GSM-E Rev A
S I
CREEN MAGE
Getting Started Guide
Print Now button.
Print Now button.
187