Measure Modes - Teledyne LabMaster 10 Zi Series Operator's Manual

LabMaster 10 Zi Oscilloscopes
5.
In the mini-dialog to the right of the main setup dialog, touch the
Gate tab to narrow the span of measurement.
6.
Touch the Accept tab to define parameter values to be used in
the measurement.

Measure Modes

The selections for Measure Mode allow you to quickly apply parameters
for standard vertical and standard horizontal setups, and custom
setups.
Standard Vertical Parameters
These are the default Standard Vertical Parameters:
mean sdev
Standard Horizontal Parameters
These are the default Standard Horizontal Parameters:
freq period
134
max. min.
width rise
ampl pkpk
fall delay
LM10Zi-GSM-E Rev A
top base
duty num
points