Table of Contents
Advertisement
The Track is then shown along with its respective trace descriptor
label for the selected math function.
6.
Touch the newly displayed Track math function trace label if you
want to change any settings in the Track dialog:
Pass/Fail Parameter Testing
Pass/Fail Parameter Testing Overview
Access the main Pass/Fail dialog by selecting Analysis → Pass/Fail
Setup... from the menu bar. The main Pass/Fail dialog is shown.
Access the respective Qx dialogs either by touching a Qx button on this
main Pass/Fail dialog, or touching a Qx tab as described in Displays
Containing Masks (on page 117).
LM10Zi-GSM-E Rev A
Getting Started Guide
149
Advertisement
Table of Contents
