LabMaster 10 Zi Oscilloscopes
instances when a Num Segments miscount occurs for some
reason and the oscilloscope waits indefinitely for an
unforthcoming segment. During that time, no oscilloscope
functions are accessible. By means of a timeout value, however,
the acquisition will be completed, the waveform displayed, and
control of the oscilloscope returned to the user after the timeout
has elapsed.
6.
Under Display Settings, touch inside the Display mode control,
and select a sequence mode display from the pop-up menu.
NOTE: Once a single acquisition has started, you can interrupt the
acquisition at any time by pressing the S
a second time or by pressing the S
case, the segments already acquired will be retained in memory.
7.
Touch the
80
S
trigger front panel button.
INGLE
front panel button
INGLE
front panel button. In this
TOP
LM10Zi-GSM-E Rev A