Viewing Time Stamps - Teledyne LabMaster 10 Zi Series Operator's Manual

5.
Touch inside the First Selected data entry control and select the
first segment you want to display. Use the same method to
provide a value in the Number of Selected data entry control.
NOTE: In Persistence mode, the segments are automatically overlaid
one on top of the other in the display. In non-Persistence mode, they
appear separately on the grid.

Viewing Time Stamps

You can view time stamps for each segment.
1.
Touch Timebase → Acquisition Status on the menu bar.
OR
Touch Vertical → Channel Status on the menu bar.
2.
Touch the Trigger Time tab.
3.
Under Show Status For, touch the Time button.
4.
Touch inside the Select Segment control and enter a segment
number value (you can also touch the arrow buttons to scroll
through segment times).
LM10Zi-GSM-E Rev A
View Segment Time Stamps
Getting Started Guide
83