Getting Started Guide
Specifications
NOTE: Specifications are subject to change without notice.
Detailed specifications are maintained on the product Datasheet
available at www.teledynelecroy.com. Always check the website for the
most up to date specifications.
Certifications
This section contains the instrument's Electromagnetic Compatibility
(EMC), Safety and Environmental certifications.
EMC Compliance
EC D
C
- EMC
ECLARATION OF
ONFORMITY
The oscilloscope meets intent of EC Directive 2004/108/EC for
Electromagnetic Compatibility. Compliance was demonstrated to the
following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006, EN 61326-2-1:2006 EMC requirements for electrical
1
equipment for measurement, control, and laboratory use.
Electromagnetic Emissions:
2 3
CISPR 11:2003, Radiated and conducted Emissions, Group 1, Class A
EN 61000-3-2:2006 Harmonic Current Emissions, Class A
EN 61000-3-3/A2:2005 Voltage Fluctuations and Flickers, Pst = 1
Electromagnetic Immunity
:
EN 61000-4-2:2001 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV
4
vertical/horizontal coupling planes
EN 61000-4-3:2006 RF Radiated Electromagnetic Field, 3 V/m, 80-1000
4
MHz; 3 V/m, 1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
EN 61000-4-4:2004 Electrical Fast Transient/Burst, 1 kV on power supply
4
lines, 0.5 kV on I/O signal data and control lines
LM10Zi-GSM-E Rev A
205