Run Control
1.800.561.8187
16
Press the button to enable the waveform auto setup function. The oscilloscope
will automatically adjust the horizontal time base, vertical scale and trigger
mode according to the input signal to provide a triggered stable display.
Press the button to set the state of the instrument to "RUN" or "STOP". In the
"RUN" state, the button glows yellow; In "STOP" state, the button glows red.
Press the button to reset the oscilloscope to its default setup. The default
voltage scale and timebase scale are respectively 1V/div and 1μs/div.
This button is a shortcut key for clear function. When measurement statistics
are being displayed, press this button to clear the count and begin a new
statistical count. When the screen persistence feature is turned on, press this
button to clear the persistence.
www.
information@itm.com
.com