Back Of Mcm-Zi Master Control Module - Teledyne LabMaster 10 Zi Series Getting Started Manual

LabMaster 10 Zi Oscilloscopes

Back of MCM-Zi Master Control Module

1. ChannelSync Outputs -
SMA 10 GHz Clock and
PCIe 1 Lane Control
Connections (for
corresponding
Acquisition Modules)
2. 10 MHz Reference Clock
Output
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item 1) using the provided
chain-linked 50 Ω terminations (not shown).

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master Control
Module and Acquisition Modules.

DVI-D Video Output is for use with an additional external monitor for
Extended Desktop mode.
10
Number and Description
3. 10 MHz Reference
Clock Input (Grounded
EMI Shield required
when not in use)
4. Removable Storage
Drive
5. AC Power Inlet
6. The I/O Panel
7. DVI-D Video Output
8. PCIe 4 Lane Data
Inputs (from
corresponding
Acquisition
Modules)
922561-00 Rev A