Table of Contents
Advertisement
SET UP
The Side of Your Oscilloscope
The side of the HDO8000A houses a removable
hard drive.
To remove the drive:
1.
Loosen the two knobs that secure the
cover and remove it. You may use a
screwdriver to loosen the knobs.
2.
Grab the drive by the attached tab and
pull out.
To replace the drive:
1.
Insert the drive with the label facing away
from you. Do not force the drive into place.
Strong resistance may mean the drive is
flipped the wrong way.
2.
Replace the cover.
Power down the oscilloscope before
removing or replacing the drive. Failure to
do so may damage the instrument.
Secure the cover at all times when the
drive is in place.
12
Advertisement
Table of Contents
