Audio Inputs - Technical Specifications; Control Interfaces And Devices - Technical Specifications - Teledyne 804A User Manual

804 Series Video Test Generator – User Guide
Analog Audio
Audio Inputs – Technical Specifications
3.3
Table 3-3 below describes the audio inputs supported on the 804/804A/804B instrument.
Note: All audio interfaces on the 804/804A/804B shall be connected to only SEL V / double insulated circuits of other devices.
Table 3-3: 804/804A/804B Digital Audio Inputs
Note: These connectors and the associated functions, are not available on new 804, 804A and 804B units
Interface
SPDIF - RCA
Optical – JIS FO5
Control Interfaces and Devices – Technical Specifications
3.4
The following illustrations and Table 3-4 describe the control interfaces and devices on the 804/804A.
Note: All control interfaces on the 804/804A/804B shall be connected to only SEL V / double insulated circuits of other
devices.
Page 8
(2) RCA audio connectors:
Channels: 2 (L/R).

Signal: Sine Wave.

Frequency: 10Hz to 20kHz in 1Hz increments.

Amplitude: -99dB to 0dB in 1dB increments.

Description
SPDIF RCA audio connector
Optical audio connector
Revision B3