Portlogclear - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

portLogClear

portLogClear
Clears the port log.
SYNOPSIS
portlogclear
DESCRIPTION
Use this command to clear the port log. It is recommended that you clear the port log before triggering an
activity so that the log displays only the log events related to that activity.
If the port log is disabled, portLogClear enables it. The port log is disabled automatically when certain
errors occur to allow the collection of all the information needed to understand the cause of the error.
When the port log is disabled, the events already present in the log are preserved, but new events are
not collected.
The following errors disable the port log:
•
•
•
•
Refer to the Fabric OS Message Reference for more information on these errors.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To clear the port log:
SEE ALSO
portLogDump,
728
FCPH, EXCHBAD
FCPH, EXCHFREE
NBFSM, DUPEPORTSCN
UCAST, RELICPDB
switch:admin> portlogclear
switch:admin> portlogshow
port log is empty
portLogShow
Fabric OS Command Reference
53-1001764-01