Figure 1-4 Trace Display In Both Windows - Agilent Technologies N1911A User Manual

1 Introduction
The following trace displays are only available when a P-Series or an E-Series E9320 power
N O T E
sensor is connected.

Figure 1-4 Trace display in both windows

22
23 The
Single or continuous triggering (
N O T E
menu to view a trace window. The Acqn menu is accessed by pressing
Trace
14
23
Figure 1- 4 shows both windows configured to trace display mode. This
is only available with an P- Series or an E- Series E9320 power sensor is
connected. The captured trace, channel, and scaling are displayed. The
lower window is the selected window.
indicates the point on the trace where trigger event occurs.
is disabled when
Sing Trig
Cont Trig
or
Free Run
is selected.
N1911A/1912A P-Series Power Meters User's Guide
22
) must be selected from the Acqn
,
Trigger
.