Figure 2-30 "Edit Offset" Display With Data Added - Agilent Technologies N1911A User Manual

2 General Power Meter Functions
To view the frequency dependent offset tables currently stored in the
power meter, press
Dependent Offset Tables screen is displayed as shown in
Editing frequency dependent offset tables requires the following steps:
1 Identify and select the table you want to edit
2 Rename the table
3 Enter the frequency and offset pairs
4 Save the table
Procedure
First select the table you want to edit as follows:
A frequency in the range of 0.001 MHz to 1000.0 GHz can be entered. A calibration factor in
N O T E
the range of 1 % to 150 % can be entered.
1 Press
2 Choose the table you want to edit using the

Figure 2-30 "Edit Offset" display with data added

46
Tables
,
Edit Table
to display the Edit Offset screen as shown in
, ,
Tables Freq. Dep. Offset
Freq. Dep. Offset
to display the Offset Tbls screen.
,
N1911A/1912A P-Series Power Meters User's Guide
. The Frequency
Figure 2- 28.
and keys. Press
Figure 2- 30.