Figure 1-14 Password Security Dialog Box - Agilent Technologies N1911A User Manual

Figure 1-14 Password security dialog box.

Click the Submit (accept the default password) and the window opens as
shown in
For P-Series power meters with latest firmware upgrade to be LXI-C compliant, a LAN reset
N O T E
needs to be performed to ensure that the password is reset to default. See LAN reset
procedure as below.
Procedure:
1 Press
2 Press
3 Press
When
N O T E
You can change the password from the Configuring your N1912A Power Meter window as
N O T E
shown in
Password parameter.
N1911A/1912A P-Series Power Meters User's Guide
Figure 1- 15. The default password is "agilent".
Remote Interfaces
,
1 of 2
softkey to display the second page of the Remote I/F menu.
LAN Reset
softkey to reset the LAN settings to default.
LAN Reset
softkey is pressed, it will also change the GPIB address to default.
Figure 1-15. Scroll down the Parameter column until you locate the Change
to display the Remote Interfaces screen.
Introduction 1
27