1
Introduction
The Display Layout
Figure 1- 1
dual numeric mode.
Pressing
Figure 1-1 Dual numeric display
1 The status reporting line displays messages and the control status of
2 The blue highlight on the right hand side of the window shows it is the
3 The measured channel is shown. With a P- Series or an E- Series E9320
4 The associated measurement type is shown below the channel and gate
10
shows the display layout when two windows are configured in
,
1
3
4
6
the power meter. For example, the status can be either RMT (remote,
GPIB, USB or LAN operation) or LCL (local, front panel operation).
The message fields indicate ERR for any error conditions that occur or
informing you to Please Zero the power sensor.
currently selected measurement display line. This measurement line is
the Upper Window/Upper Measurement.
power sensor connected, and channel in trigger mode, the associated
gate number is shown.
number.
Disp Type
the other display formats are available.
N1911A/1912A P-Series Power Meters User's Guide
9
2
8
5
7