2
General Power Meter Functions
Setting the Measurement Frequency
Entering the frequency of the RF signal you are measuring optimizes the
accuracy and minimizes measurement uncertainty, especially when making
comparative measurements between signals.
Procedure
Set the measurement frequency as follows:
1 Press
2 Use the
Figure 2-16 Frequency pop-up
3 Confirm your choice by pressing
4 Press
32
. On dual channel meters select the required channel.
and
to display the Frequency pop- up. Use the numeric keypad to
enter the required value in the Frequency pop- up window.
key to close the Channel Setup screen.
keys to highlight the Frequency value field and press
MHz
or
N1911A/1912A P-Series Power Meters User's Guide
GHz
.