Trace Setting
Pulse Width
Figure 3-97 Trace display with trace control menu
The fields on the lower left of the screen are the X and Y trace setup
fields. Using the
value. (See
The table on the lower right of the screen shows the eight automatic time
measurements performed on the first complete captured pulse after the
trigger. The eight measurements are rise time, fall time, time to positive
occurrence, time to negative occurrence, pulse width, pulse period (pulse
repetitive interval), pulse repetitive frequency and duty cycle.
The current settings of the X and Y scale are displayed on the reporting
line above both tables.
If you want to view the trace in linear mode, the Trace Setup is the only location where you
N O T E
can change the Y-scale units from
Gate Control Press
gate features are described in greater details in
Enlarged Window"
N1911A/1912A P-Series Power Meters User's Guide
Pulse Period
or
Figure 3-
97)
Gate Control
on page 122".
Using P-Series Power Sensor
keys you can highlight the item and change its
to
; otherwise the default unit is in logarithmic.
dBm
Watts
to display the Gate Ctrl menu. Setting the
Gate 2 Active
Rising Edge
Falling Edge
Duty Cycle
Pulse Repetitive Frequency
"Gate Control in a Single
3
125