Figure 4-109Trace Display With Trace Control Menu - Agilent Technologies N1911A User Manual

Trace Setting
Pulse Width

Figure 4-109Trace display with trace control menu

The fields on the lower left of the screen are the X and Y trace setup
fields. Using the
value. (See
The table on the lower right of the screen shows the 8 automatic time
measurements performed on the first complete captured pulse after the
trigger. The 8 measurements are rise time, fall time, time to positive
occurrence, time to negative occurrence, pulse width, pulse period (pulse
repetitive interval), pulse repetitive frequency and duty cycle.
The current settings of the X and Y scale are displayed on the reporting
line above both tables.
If you want to view the trace in linear mode, the Trace Setup is the only location where you
N O T E
can change the Y-scale units from
N1911A/1912A P-Series Power Meters User's Guide
Pulse Period
or
Figure 4- 109)
Using E9320 E-Series Power Sensors
keys you can highlight the item and change its
to ; otherwise the default unit is in logarithmic.
dBm Watts
Gate 2 Active
Rising Edge
Falling Edge
Duty Cycle
Pulse Repetitive Frequency
4
145