Figure 4-111E-Series E9320 Power Sensor Dafault Channel Setup - Agilent Technologies N1911A User Manual

Improving the Accuracy with Additional Settings
You can now return to the setup menus and adjust the default setting to
obtain greater measurement accuracy.
Channel Setup
• Press

Figure 4-111E-Series E9320 power sensor dafault channel setup

For range settings, only UPPER and LOWER ranges are available in Normal and Triggered
N O T E
mode.
Use the
to the appropriate sections.
• Meas Avg
• Video Avg
• Step Detec
•
N1911A/1912A P-Series Power Meters User's Guide
. The Channel Setup screen is displayed. If using an
N1912A, select the channel you want to configure.
, , , and
to configure the setting. For further detail on these settings, refer
"Setting Measurement Averaging"
:
"Setting the Video Averaging"
:
"Step Detection"
t:
"Setting the Video Bandwidth"
Video B/W:
Using E9320 E-Series Power Sensors
keys to highlight the setting field and press
on page 49
on page 52
on page 51
on page 54
4
147