Figure 8-141Sensor Table Selected - Agilent Technologies N1911A User Manual

Using N8480 Series Power Sensors 8
Selecting a Sensor Calibration Table
You can select a calibration factor table from the key menu
Tables Sensor Cal Table
followed by and .
The State column indicates if any calibration factor tables are currently
selected. The Sensor Tbls screen is shown in
Figure 8- 141.
You can also view which sensor table is being used by pressing the ,
Offset
N O T E
and
keys to highlight the CF Table setting field and press
use the and
to display the table.
Procedure
Select sensor calibration table as follows:
Tables Sensor Cal Tables
1 Press
, , .
2 Use the
and keys to highlight one of the 20 table titles and press
Table On
to highlight .

Figure 8-141Sensor table selected

N1911A/1912A P-Series Power Meters User's Guide 209