Figure 3-93 Trace Display In Dual Channel Power Meter - Agilent Technologies N1911A User Manual

3 Using P-Series Power Sensor
Step 3. Setting the Trigger
To use the measurement gates the power meter must be triggered.
A trigger can be taken from a rising or falling measured power level or
controlled externally using the Ext Trig input.
• Press
Step 4. Setting the Display to Trace
Using trace display provides a visual representation of the signal of
interest.
• Press

Figure 3-93 Trace display in dual channel power meter

120
. The Trigger menu is displayed.
The trigger status is displayed below the
Acqn
menu. Press the
continuous triggering.
When you have completed the procedure you may return to the Trigger
menu later to add more accuracy to the remaining trigger parameters,
to help you achieve a stable and reliable trigger.
Disp Type
,
Acqn
softkey and select
Trace
, to display the Trace window.
N1911A/1912A P-Series Power Meters User's Guide
label in the Trigger
Cont Trig
to configure