Front Panel Keys And Connections - Agilent Technologies N1911A User Manual

Front Panel Keys and Connections

This section briefly describes the functions of the front panel keys and
connectors.
These keys are located to the left of the display.
N1911A/1912A P-Series Power Meters User's Guide
Key Function
Press this key to preset the power meter. An option list of
pre-installed measurement configurations is presented. Select an
option and press the confirm key.
Press this key to control the power meter from the front panel when
it is operating via the remote interfaces (when Local Lock Out is not
enabled).
Press this key to select the upper or lower measurement window.
The selected window is highlighted by a blue line on the right side
of the window. Any measurement setup you create is performed in
the selected window.
Press this key to choose windowed, expanded, or full-screen dis-
play of a numeric measurement. It also provides quick access to the
Gate Control screen and menu when a trace window is selected.
Press this key to switch the meter between on and standby. When
power is supplied, the background LED is red. Pressing the key,
switches the power meter on and the background LED is green.
Introduction 1
5