Figure 1-10 Status Message Before Toggle Id Is Selected; Figure 1-11 Status Message When Toggle Id Is Selected - Agilent Technologies N1911A User Manual

1 Introduction

Figure 1-10 Status message before Toggle ID is selected.

Figure 1-11 Status message when Toggle ID is selected.

When power meter is configured to LAN, the Lan Status on
Remote Interfaces
the LAN configuration connection. There are six types of Lan Status
messages that may occur. See
example of Lan Status message.
24
screen will show the LAN error condition and status of
Table 1-
N1911A/1912A P-Series Power Meters User's Guide
Status message "LAN
identity start" to blink 3
times when Toggle ID is
selected.
1. See also Figure 1- 12 for the