4
Using E9320 E-Series Power Sensors
Setting Offsets
Press
Figure 4-112Channel offset display
Use the
change. Press
on setting these, refer to the appropriate section.
• Offset
• FDO Table
Trigger Setup
Press
The trigger status is displayed below the
Press the
parameters, for example, hold- off and hysteresis, to help you achieve a
stable and reliable trigger. Hence, this ensures that the gates you have set
up are capturing the required signal information. See
the Trigger," starting on page 66 for further information.
148
Offsets
. The Offsets Setup screen is displayed.
,
,
, and
to configure the required settings. For further detail
"Setting Channel Offsets"
:
"Setting Frequency Dependent Offsets"
:
. The Trigger menu is displayed.
Settings
softkey and add more accuracy to the remaining trigger
keys to highlight any parameters you want to
on page 39
Acqn
N1911A/1912A P-Series Power Meters User's Guide
on page 42
label in the Trigger menu.
Chapter
2, "Setting