Figure 2-39 Time Gating Start Pop-Up; Figure 2-40 Time Gating Length Pop-Up - Agilent Technologies N1911A User Manual

2 Press

Figure 2-39 Time Gating Start pop-up

3 Complete the entry by pressing the required second, millisecond,
4 Highlight the Gate Length you want to configure using the

Figure 2-40 Time Gating Length pop-up

5 Complete the entry by pressing the required second, millisecond, or
6 Repeat this process until you have setup all the required gates.
Auto Gate
This feature will automatically set the gates (start and stop times of the
user defined time interval) for each measurement relative to the rising
and falling edges' trigger point.
• Proceed to the second page of Gate Ctrl menu and press
N1911A/1912A P-Series Power Meters User's Guide
and use the numeric keypad to enter the required value in
the Time Gating Start pop- up window.
microsecond or nanosecond ( ,
and
keys.
microsecond or nanosecond ( ,
softkey.
General Power Meter Functions
s ms us ns
, or ) softkey.
s ms us ns
, or ) softkey.
2
, , ,
Auto Gate
59