Figure 1-2 Single Numeric And Analog Display - Agilent Technologies N1911A User Manual

1 Introduction

Figure 1-2 Single numeric and analog display

10
11 The upper window is configured to show a single numeric display.
12 The lower window is configured to show an analog meter which
13 With a P- Series or an E- Series E9320 power sensor connected, the
14 The channel measurement frequency.
15 This displays the connected sensor, the offset value, and the acquisition
12
14
13
11
12
Figure 1- 2 shows the default display mode of two measurement
windows. The upper measurement window has a blue highlight on the
right hand side of the window showing it has been selected.
Using the , , or
measurement window.
Using the
can choose either two rectangular windows, a single enlarged window,
or a full screen display by pressing. The display style is applied to the
currently selected window or measurement line.
displays the measurement result and the meter scaling.
symbol shows the trigger state
Slope), or (Positive Slope).
mode on the channel. On dual channel models it shows for both
channels.
keys you can change the selection of the
key on numeric measurement results window you
(Free Run),
N1911A/1912A P-Series Power Meters User's Guide
15
10
(Stopped), (Negative