35
Displaying port security information
TABLE 221
This field...
Secure-Src-Addr
Resource
Age-Left
Shutdown/Time-Left
Displaying port security statistics
You can display port security statistics for an interface or for a module.
For example, to display port security statistics for interface 7/11, enter the following command.
PowerConnect#show port security statistics e 7/11
Port
----- ----------- ------------- --------- ------------------
7/11
Syntax: show port security statistics <port>
Specify the <port> variable in the following formats:
•
TABLE 222
This field...
Port
Total-Addrs
Maximum-Addrs
Violation
Shutdown/Time-Left
For example, to display port security statistics for interface module 7, enter the following command.
PowerConnect#show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics <module>
Table 223
1270
Output from the show port security mac command (Continued)
Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
1
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
Output from the show port security statistics <port> command
describes the output from the show port security statistics <module> command.
Displays...
The secure MAC address.
Whether the address was secured using a local or global resource.Refer to
"Local and global resources"
on page 1264 for more information.
The number of minutes the MAC address will remain secure.
Whether the interface has been shut down due to a security violation and the
number of seconds before it is enabled again.
1
0
Displays...
The slot and port number of the interface.
The total number of secure MAC addresses on the interface.
The maximum number of secure MAC addresses on the interface.
The number of security violations on the port.
Whether the port has been shut down due to a security violation and the
number of seconds before it is enabled again.
PowerConnect B-Series FCX Configuration Guide
no
53-1002266-01