Dell PowerConnect B-FCXs Configuration Manual page 1295

PowerConnect#show dot1x mac-address filter
Port 1/3 (User defined MAC Address Filter) :
Syntax: show dot1x mac-address-filter
To display the user-defined IP ACLs active on the device, enter the following command.
PowerConnect#show dot1x ip-ACL
Port 1/3 (User defined IP ACLs):
Extended IP access list Port_1/3_E_IN
permit udp any any
Extended IP access list Port_1/3_E_OUT
permit udp any any
Syntax: show dot1x ip-ACL
Displaying dynamically applied MAC address filters and IP ACLs
To display the dynamically applied MAC address filters active on an interface, enter a command
such as the following.
PowerConnect#show dot1x mac-address-filter e 1/3
Port 1/3 MAC Address Filter information:
802.1X Dynamic MAC Address Filter :
Port default MAC Address Filter:
Syntax: show dot1x mac-address-filter all | ethernet <port>
The all keyword displays all dynamically applied MAC address filters active on the device.
Specify the <port> variable in the following formats:
•
To display the dynamically applied IP ACLs active on an interface, enter a command such as the
following.
PowerConnect#show dot1x ip-ACL e 1/3
Port 1/3 IP ACL information:
802.1X dynamic IP ACL (user defined) in:
Port default IP ACL in:
802.1X dynamic IP ACL (user defined) out:
Port default IP ACL out:
Syntax: show dot1x ip-ACL all | ethernet <port>
PowerConnect B-Series FCX Configuration Guide
53-1002266-01
mac filter 1 permit any any
mac filter-group 2
No mac address filter is set
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
ip access-list extended Port_1/3_E_IN in
No inbound ip access-list is set
ip access-list extended Port_1/3_E_OUT out
No outbound ip access-list is set
Displaying 802.1X information
34
1253