Disabling Aging For Authenticated Mac Addresses - Dell PowerConnect B-FCXs Configuration Manual

Powerconnect b-series fcx
Hide thumbs Also See for PowerConnect B-FCXs:
Table of Contents

Advertisement

36
Configuring multi-device port authentication

Disabling aging for authenticated MAC addresses

MAC addresses that have been authenticated or denied by a RADIUS server are aged out if no
traffic is received from the MAC address for a certain period of time:
You can optionally disable aging for MAC addresses subject to authentication, either for all MAC
addresses or for those learned on a specified interface.
Globally disabling aging of MAC addresses
On most devices, you can disable aging for all MAC addresses on all interfaces where multi-device
port authentication has been enabled by entering the following command.
PowerConnect(config)#mac-authentication disable-aging
Syntax: mac-authentication disable-aging
Enter the command at the global or interface configuration level.
The denied-only parameter prevents denied sessions from being aged out, but ages out permitted
sessions.
The permitted-only parameter prevents permitted (authenticated and restricted) sessions from
being aged out and ages denied sessions.
Disabling the aging of MAC addresses on interfaces
To disable aging for all MAC addresses subject to authentication on a specific interface where
multi-device port authentication has been enabled, enter the command at the interface level.
Example
PowerConnect(config)#interface e 3/1
PowerConnect(config-if-e1000-3/1)#mac-authentication disable-aging
Syntax: [no] mac-authentication disable-aging
Changing the hardware aging period for blocked
MAC addresses
When the Dell PowerConnect device is configured to drop traffic from non-authenticated MAC
addresses, traffic from the blocked MAC addresses is dropped in hardware, without being sent to
the CPU. A Layer 2 hardware entry is created that drops traffic from the MAC address in hardware.
If no traffic is received from the MAC address for a certain amount of time, this Layer 2 hardware
entry is aged out. If traffic is subsequently received from the MAC address, then an attempt can be
made to authenticate the MAC address again.
1288
Authenticated MAC addresses or non-authenticated MAC addresses that have been placed in
the restricted VLAN are aged out if no traffic is received from the MAC address over the device
normal MAC aging interval.
Non-authenticated MAC addresses that are blocked by the device are aged out if no traffic is
received from the address over a fixed hardware aging period (70 seconds), plus a
configurable software aging period. (Refer to the next section for more information on
configuring the software aging period).
PowerConnect B-Series FCX Configuration Guide
53-1002266-01

Advertisement

Table of Contents
loading

Table of Contents