Fcx Devices - Dell PowerConnect B-FCXs Configuration Manual

36
Displaying multi-device port authentication information
TABLE 230
This field...
MAC Address
RADIUS Server
Authenticated
Time
Age
Dot1x
Displaying the MAC authentication table for PowerConnect B-Series

FCX devices

For PowerConnect B-Series FCX devices, there are three commands you can use to display MAC
authentication information:
•
•
•
This section describes the output for these commands.
To display MAC authentication information for FCX devices, enter the show table <mac address>
command as shown.
PowerConnect#show table 0000.0010.1002
Syntax: show table <mac address>
The <mac address> variable is the specified MAC address.
Output from this command resembles the following:
PowerConnect#show table 0000.0010.1002
-------------------------------------------------------------------------------
MAC Address Port Vlan Authenticated Time Age dot1x
-------------------------------------------------------------------------------
0000.0010.1002 2/1/48 2 Yes 00d00h30m57s Ena Dis
PowerConnect#
To display the table of allowed (authenticated) mac addresses enter the show table allowed-mac
command as shown.
Syntax: show table allowed-mac
Output from this command resembles the following:
1298
Output from the show auth-mac-addresses detailed command (Continued)
show table <mac address>
show table allowed-mac
show table denied-mac
Displays...
The MAC addresses learned on the port. If the packet for which multi-device
port authentication was performed also contained an IP address, then the IP
address is displayed as well.
The IP address of the RADIUS server used for authenticating the MAC
addresses.
Whether the MAC address has been authenticated by the RADIUS server.
The time at which the MAC address was authenticated. If the clock is set on the
Dell PowerConnect device, then the actual date and time are displayed. If the
clock has not been set, then the time is displayed relative to when the device
was last restarted.
The age of the MAC address entry in the authenticated MAC address list.
Indicated if 802.1X authentication is enabled or disabled for the MAC address
PowerConnect B-Series FCX Configuration Guide
53-1002266-01