Verify A Stack Configuration; Displaying The Status Of Stacking Ports - Dell S3048-ON Configuration Manual

Verify a Stack Configuration

The light of the LED status indicator on the front panel of the stack identifies the unit's role in the stack.
• Off indicates the unit is a stack member.
• The master LED is in OFF state for the standby unit.
• Solid green indicates the unit is the stack master (management unit).

Displaying the Status of Stacking Ports

To display the status of the stacking ports, including the topology, use the following command.
• Display the stacking ports.
EXEC Privilege mode
show system stack-ports
Examples of Viewing the Status for Stacked Switches
Dell#show system stack-ports
Topology: Daisy chain
Interface Connection
---------------------------------------------------------
2/49
2/50
Dell#
The following example shows the parameters for the management unit in the stack.
Dell#show system stack-unit 3
-- Unit 3 --
Unit Type
Status
Next Boot
Required Type
Current Type
Master priority
Hardware Rev
Num Ports
Up Time
Dell Networking OS Version : 9.8(0.0P2)
Jumbo Capable
POE Capable
FIPS Mode
Boot Flash
Boot Selector
Memory Size
Temperature
Voltage
Serial Number
Part Number
Vendor Id
Date Code
Country Code
Piece Part ID
PPID Revision
Service Tag
Expr Svc Code
Auto Reboot
Burned In MAC
No Of MACs
Link Speed Admin
(Gb/s) Status
10 up
10 up
: Management Unit
: online
: online
: S3048-ON - 52-port GE/TE (SG-ON)
: S3048-ON - 52-port GE/TE (SG-ON)
: 0
: 0.0
: 52
: 1 hr, 6 min
: yes
: no
: disabled
: 3.24.2.1
: 3.24.0.5
: 2127622144 bytes
: 34C
: ok
: NA
: Rev
: NA
: NA
: NA
: N/A
: N/A
: N/A
: 0
: enabled
: 00:12:13:34:12:40
: 3
Link
Status
down
down
Stacking 817