Host Groups; Protocol Groups - Xerox WorkCentre 5755 System Administrator Manual

Host Groups

Host Group page allows you to view and manage host groups. A host group is a logical grouping of
hosts based on their specific IP Address or subnet address range.This option displays all the Host
Groups saved and the details of each Host Group.
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Security] link.
2. Select [IP Sec] in the directory tree.
Ensure [Host Groups] tab is highlighted under the IPsec heading.
3.
4. Host Groups can be deleted by highlighting a Host Group in the IP Host Group area, and clicking
on the [Delete] button. If the Host Group selected is not being used by a security policy, then click
on the [OK] button.
5. To add or edit a Host Group in the IP Host Group area, either click on the [Add New Host Group]
button or highlight a Host Group and click on the [Edit] button.
Note: If you change the name of the Host Group that is being used in the Security policy, then
the updated host group name will also be reflected in the security policy details.
6. In the IP Host Group Details area:
a. To define or modify a Host Group enter the name of the Host Group in the [Name] field.
b. Enter a description or purpose of this Host Group in the [Description] fields.
7. In the Address List area select at least one set of network information.
a. Select either [IPv4] or [IPv6].
From the Address Type drop-down menu, select one of the following:
b.
• Specific - to specify a single IP Address.
• All - if all addresses of the IP type are to be included.
• Subnet - to specify a range of IP Addresses.
c. For the [IP Address] field, enter the Specific or Subnet address range. For a Subnet range,
enter the lowest IP Address in the fields provided, then the final IP lower octet (for IPv4) or
range (for IPv6) in the final field.
d. Click on the [Add] button, to add the address range to the host group.
8. Click on the [Save] button to return to the IPsec page.
9. Click on the [OK] button when you see the message "Properties have been successfully
modified" to save changes and return to the IP Sec page.

Protocol Groups

This option displays all the Protocol Groups saved and the details of each Protocol Group.
1. From the IP Sec page, click on the [Protocol Groups] tab under IPsec heading.
2. Protocol Groups can be deleted by highlighting a Protocol Group in the IP Protocol Groups area
and clicking on the [Delete] button. If the Protocol Group selected is not being used by a security
policy, then click on the [OK] button.
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
on page 16.
System Administrator Guide
Security
173