Editing Or Deleting An Action; Managing Host Groups - Xerox WorkCentre 7800 Series System Administrator Manual

Security
8. Under Hash, select from the following:
SHA1
−
− None
9. If you selected ESP or BOTH for the IPsec Security type, select one or more of the following
Encryption types:
Note: If the IPsec Security type is set to AH, the Encryption type options do not appear.
− AES
3DES
−
− Null
10. Click Save to apply the new settings or Undo to retain the previous settings.

Editing or Deleting an Action

To edit or delete an action, select the action from the list, then click Edit or Delete.

Managing Host Groups

Host groups are groupings of computers, servers, or other devices that you want to control using security
policies.
Creating a New Host Group
1. Click Host Groups at the top of the IPsec page.
Click Add New Host Group.
2.
3. Type a Name and a Description for the group.
Under Address List, select IPv4 or IPv6.
4.
Select an Address Type. Options are Specific, All, or Subnet.
5.
6. Type the appropriately formatted IP address.
To continue to add addresses to the group, click Add.
7.
8. To delete addresses, next to any address, click Delete.
Click Save to apply the new settings or Undo to retain the previous settings.
9.
Editing or Deleting a Host Group
To edit or delete a host group, select the host group from the list, and click Edit or Delete.
100 WorkCentre 7800 Series Multifunction Printer
System Administrator Guide