Extreme Networks ExtremeWare Command Reference Manual page 43

1
Command Reference Overview
Introduction
This guide provides details of the command syntax for all ExtremeWare commands as of
ExtremeWare version 7.0.0.
NOTE
ExtremeWare 7.0.0 only supports Extreme Networks products that contain the "i" series chipset.
For historical reasons, commands and command options supported in ExtremeWare 4.1 on switches
based on the original Summit™ chipset are also included. This guide does not cover the Summit
e-series switches.
This guide does not provide feature descriptions, explanations of the technologies, or configuration
examples. For information about the various features and technologies supported by Extreme Networks
switches, see the installation and user guides for your product. This guide does not replace the
installation and user guides; this guide supplements the installation and user guides.
Audience
This guide is intended for use by network administrators who are responsible for installing and setting
up network equipment. It assumes a basic working knowledge of the following:
• Local area networks (LANs)
• Ethernet concepts
• Ethernet switching and bridging concepts
• Routing concepts
• Internet Protocol (IP) concepts
• Routing Information Protocol (RIP) and Open Shortest Path First (OSPF) concepts
• Border Gateway Protocol (BGP-4) concepts
• IP Multicast concepts
• Distance Vector Multicast Routing Protocol (DVMRP) concepts
• Protocol Independent Multicast (PIM) concepts
ExtremeWare Software 7.0.0 Command Reference Guide 43